What if the ring cannot be pulled? 5 ways to teach you to easily solve!
Gently place your index finger on the ring and place your thumb under it.Start by gently turning the ring back and forth while slowly pulling the ring out.
Do not pull the ring too hard,or pull the ring.Otherwise it will make your hands more swollen,making the ring harder to remove.
Lubrication method
Use lubricant.Many skin care household items can be used to act as lubricants,allowing you to remove the ring unscathed.Some basic ingredients containing ammonia cleaners(such as Stellar)usually work best.If your skin is damaged or scratched,choose your oil wisely and apply it to the joints of your hand.
Rotate the ring back and forth and put some lubricant underneath.Rotate the ring back and forth one or two times on the finger while spraying or rubbing more lubricant on it.Gently pull the ring from your finger and it is necessary to turn the ring back and forth as you pull.
Lift method
raise your hand.If you still can't remove your ring,try holding your hand up a few minutes above your shoulder.
Cold water method
Soak your hands in cold water.Have you found that your ring is loose in cold weather than in hot weather?Put your hands in cold water,but not cold water,and soak for a few minutes.You don't need to soak your hands.
Flossing
Implementation steps:
1,through the ring with cotton.You can use needles,toothpicks,small steel pieces to help you wear.
2.Wrap your fingers with cotton until you reach your knuckles.Stick your fingers around,but don't be too tight or too loose.
3.Pull the thread through the ring and your ring will go out until you can take it off.
4.If the ring is only part of it,then repeat the above steps from the location of your ring.